• REFLEX RACING RX28 MEDIUM SOFT FRONT SPRINGS (BLACK)

Linear springs are smoother in response than the standard springs. They are wound from smaller diameter wire and have less coils. This allows for the spring to have a more linear response through the suspension stroke. The front end tends to have a more constant response instead of getting more aggressive as the car rolls deeper; which is the case with the standard type springs. The Green Springs are similar in rate to the Kit Gold Springs (RX28A-12).

RX28A-45 Reflex Racing RX28 Hard-Coated Aluminum Top Shock Shaft 

Shed some weight from up top for an even lighter CG.  This shaft sheds 0.3g from your top shock, leaving behind a 1.41g top shock.  When combined with the new aluminum turnbuckles, part no:  RX28A-44, it will shed 0.85g up top

RX28A-43

All New RX28 Steel Chassis for your RX28G2 LM Plate Cars. This new chassis allow for fore and aft movement of 24mm wide batteries. This new chassis kit comes with lateral CF braces to locate the battery side to side, but also to stiffen the front to back structure of the car for more precise handling and higher corner speeds. The kit is finished off with a new forward center shock mount that incorporates a band-less battery hold down that is more reliable and easier to use. 

Replacement Bands for your Reflex Racing Battery holder. 

Battery hold down band

RX513V4

All New V4 Molded Spur and Covers.

Uses 2.381mm balls. This spur is compatible with most Mini-Z type ball differentials, but they do require a separate 4x7x2mm bearing.

RXC52-A3 Micro Surface Receiver

The first micro surface receiver with an antenna-less design that integrates a transponder with editable personal ID number.

Compatible with:

• NB4
• PL18

DECLARATION:

1. The RXC52 series receivers are original products, not copies or counterfeit versions of other manufacturers
2. MXO-RF and CROSSOVER-RX brands guarantee high quality and ongoing technical support

IMPORTANT!
These features must be unlocked with MXO Part# MX USB PG-ISP Compiler sold separately 

Options that can be unlocked with compiler:

• Pay to unlock the editable ID feature
• Unlocking requires the MX USB PG-ISP compiler (sold separately)
• Alternatively, purchase the RXC52 receiver with pre-unlocked TP functionality

The first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.

RXC52-A3+TP Micro Surface Receiver

The first micro surface receiver with an antenna-less design that integrates a transponder with editable personal ID number.

Key Features:

• Eliminates the need for traditional bulky transponders on 1/28~1/24 RC cars
• Personal ID number can be modified easily and unlimited times
• Transponder function can be disabled through the GUI when not in use (TP_LED turns off)

FlySky Compatibility:

• NB4
• PL18

MXO DECLARATION:

1. The RXC52 series receivers are original products, not copies or counterfeit versions of other manufacturers
2. MXO-RF and CROSSOVER-RX brands guarantee high quality and ongoing technical support

RXC52 Micro Surface Receiver

The first micro surface receiver with an antenna-less design that integrates a transponder with an editable personal ID number.

Unlock Options:

• Pay to unlock the editable ID feature
• Unlocking requires the MX USB PG-ISP compiler (sold separately)
• Alternatively, purchase the RXC52 receiver with pre-unlocked TP functionality

Compatible with FUTABA Transmitters:

• FUTABA 10PX
• FUTABA 7PX / 7PXR
• FUTABA 4PX / 4PXR
• FUTABA 4PV / 3PV
• FUTABA 4PLS / 4PL
• FUTABA 4PM
• FUTABA 7XC / 4GRS

IMPORTANT NOTICE:

1. The RXC52 series receivers are original products, not copies or counterfeit versions of other manufacturers
2. MXO-RF and CROSSOVER-RX brands guarantee high quality and ongoing technical support

Our bodies are tested tough, but accidents happen! Order your replacement nose and side clips here! Nano-Diamond tough replacements! The side clips can be mounted for standard ride height, or racing low height. Note! If you mount the body on low side of clips, some vehicle may require some clearance grinding for the differential spur gear.

Don't forget we also have the Pro Bumper System for the Sauber that protects the nose and can take a beating!

GL-FO-S-036

GL003-DMG

XMM002-CAB-ENO

XMM002-CAB-TPS

XP-ESC-C65

GL-FO-S-004

GL-FO-S-003