kit replacement part

CARBON HARD BODY MOUNT CLIPS AND CROSS PLATE

🛠️ Aluminum Heavy Weight Front Wing Mount

Upgrade your front wing mount with this durable aluminum option designed for added front-end stability and improved handling.

Weight Comparison:

• Carbon: 2.1g

• Composite: 2.9g

• Aluminum: 3.9g

Add extra weight up front to enhance grip and balance, perfect for fine-tuning your R1F1 setup.

BLKSPCER1

These replace the copper colored spacers on the battery hold down and the damper mounts

Finally here! MWX S Spec batteries are designed around the stock classes and offer the lowest IRs on the market today! lower the IR means the faster and more powerful the battery is. 

Features:

• high flow wires
• black ,black, red colored wires
• low IR (internal resistance)
• great looks!
• for best results DO NOT CHARGE OR DISCHARGE HIGHER THAN 1.5A, ANYTHING HIGHER THAN THIS WILL INCREASE THE IR AND DE STABILIZE THE BATTERY

Dual Spring Center Shock for MWX R.1 & R.1 F1
Purpose-Built Precision – Not a Universal Fit

This Dual Spring Center Shock is specifically engineered for the MWX R.1 and R.1 F1 platforms. It is not a universal shock—the shortest installable length is 33mm, making it ideal for these chassis only.

Includes the full linear spring set (used on the front as well). Note: Green and Pink are too soft for center shock use but great for front-end tuning.

What’s Included:

• Complete center shock assembly

• Full linear spring set: Green, Pink, Yellow, Purple, White

• Two matched ballstuds for both ends

• All required hardware

For even more tuning flexibility, you can also use standard R1 front springs, ranging from soft to hard:

• Green (Softest)

• Pink

• Yellow

• Purple

• White (Firmest)

Whether you're dialing in for high grip or more progressive control, this center shock gives you the adjustability and performance serious racers demand.

CCP12

1 DEGREE OF CAMBER & 2 DEGREES OF TOE

R1BLPD

These replace the copper colored spacers on the battery hold down and the damper mounts

1.5mm Aluminum Chassis for R1

Upgrade your R1 with this lightweight 1.5mm aluminum chassis, optimized for performance and handling.

Key Details:

• Recommended for LM102 setup — ideal for balanced, stable driving

• Compatible with R1 ’98 car, but requires advanced setup skills to prevent traction rolling

Weight Comparison:

• Aluminum chassis: 15.6g

• Alloy steel chassis: 26.1g

• Brass chassis: 33.8g

MWX-R1V1-23

MWX 1/28 2WD RACING KIT (SLIDER)

• ULTRA LOW CG
• LOW SLOP DESIGN
• LOW ROLL CENTER FRONT SUSPENSION
• SERVO SAVER DELETE INCLUDED
• FLOATING SERVO MOUNT
• 4 WAY BATTERY WIRE LOCATION
• TRANSPONDER MOUNT INCLUDED
• KING PINS AND ALL SHAFTS ARE TITANIUM COATED
• ALL OPTION SPRINGS ARE INCLUDED
• UNIQUE NO SIDE LINK DESIGN
• HARD BODY AND LEXAN BODY REAR MOUNTS ARE INCLUDED
• fully enclosed PN GEAR DIF INCLUDED

WHEELS, TIRES, ELECTRONICS, BODY POST AND BODIES ARE NOT INCLUDED

R1-ZS-012

If you are using the ZS axles and ZS knuckles these plates are designed to compensate for the slop elimination

ASPEC-V1

Features:

*Weight , the MWX chassis is lighter than the GL brass chassis and since most folks run this chassis in stock and super stock, the heavy weight of the car naturally makes a difference. I basically shifted the weight into better positions to stabilize the handling while calming down the steering making the chassis wide everywhere is not optimal. High level competition has taught me this.

*Due to the slightly heavier servo the car requires, I offset some of that Weight with a cutout under the servo.

*Each chassis also comes with the infamous FPM (floating pod mount). to further enhance handling.

*Coming soon will be the A spec conversion kit to allow for a GT or GLR pod so you can use 14mm rears and a gear diff!

R1-PDWHT

CSPR-23V1

AXL-033

SHKMT-RW-V1

R1SH401

-Replacement shock plastics for your R.1

🛠️ R1F1 V1.5 Shock Mount – Forward Offset

Improve stability, steering, and overall driving feel with this upgraded shock mount for your R1F1.

🔧 Key Features:

• ⚙️ Moves shock 2mm forward
  Increases stability under braking and improves on-power steering response.

• 🔄 Enhanced driving feel
  Smoother handling across the board, especially in high-grip conditions.

• 🧩 Compatible with both battery plates

  • Works with the original small battery plate

  • Fully compatible with the dual-position Big Block plate