Features:
-Replacement parts for NX-300 Specter.
-Material: Stainless Steel.
-For 1/28 model car RC.

Package Includes:
– 2 x Front Wheel Shafts.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

Manual NX276 CAIMAN SCX24 Here

Description:

• Nexx Racing CAIMAN Chassis for Axial SCX24 has exquisite workmanship.
• Caiman Chassis is made of high quality Carbon Fiber.
• Combined CNC V-adapters and others precision hardware.
• Add more stiffness.
• Cantilever Suspension kit is introduced to add more flex to your crawler.
• More durability on trail.
• Easy to install. (Manual for installation is attached on our website at the product page)
• Replacement for the original chassis. Used to upgrade and modify the RC crawler.
• Easy to change the C.G point by changing the length of the linkage.
• Suitable for both stock Motor or 2204 Conversion Brushless Motor.(NX 235; NX 281…)

Specification:
• 100% Brand new and high quality product.
• Material: Carbon Fiber.
• Numerous shock and link mounting locations. Each location results in a different shape of the RC.
• Unique Appearance.
• Extremely low weight, Caiman Chassis Kit’s total weight is approx. 23g.

Packages Includes:
• 2 x Caiman Chassis (Left/Right)
• 1 x Carbon battery tray
• 4 x Steel Threaded Adapter
• 4 x Alu V-Adapters with Bearings
• 3 x Long Aluminium Spacers
• 12 x Steel Pivot Balls
• 8 x Plastic Pivot Ball Cups
• Hardware.

Additional:
• Tele Shock Absorber Set could also be installed onto this Caiman Chassis.
• Tele Shock Absorber Set is sold separately, check at NEXX Racing website. ( NX-226)

Includes :

• 3 x Pan Head Phillip Screw M1.4×6
• 3 x Pan Head Phillip Screw M1.4×8
• 8 x Pan Head Phillip Screw M1.4×10
• 2 x Bearing 4x8x3
• 2 x Bearing 2x5x2.5

Includes :

• 3 x Pan Head Phillip Screw M1.4×6
• 3 x Pan Head Phillip Screw M1.4×8
• 8 x Pan Head Phillip Screw M1.4×10
• 2 x Bearing 4x8x3
• 2 x Bearing 2x5x2.5

Conversion of Gearbox Set and Motor Mount MANUAL

Features Gearbox Set Alu

Made of aluminium, sturdy and durable, wear resistant

CNC machined for high precision and strength

Easy to install and remove, fit to the car perfectly

Features Gear Set

The replace for the original gear set.

High quality steel.

Integral coupling.

Easy to install.

Features Spur Gear, 12T Pinion Gear:

Brass Pinion 12T 3mm hole for easy mount outrunner motor 2204

Aluminum CNC 32T 0.5 Mod Pinion Gear

Features CNC 2204 Motor Mount

Motor mounts for 2204 motors are CNC machined from aluminium billet making them very strong and lightweight. They are designed to fit Axial SCX24.

The motor mounts were designed with a mixture of both aerospace aluminum material and beautiful carbon fiber material. This will allow for proper protection for SCX24 gear set.

The aluminum motor mounts help to increase strength for holding the motors properly and also work great as a heat sink for cooler running motors.

Easy to Install.

All hardwares included.

Package included

1x51T / 19T Gear Set

1x Gearbox Set Alu

1x CNC Motor Mount

1x Spur Gear 32T

1x 12T Pinion Gear

1x Carbon Plate

2 x Bearing 4x8x3

2 x Bearing 2x5x2.5

3 x Pan Head Phillip Screw M1.4×6

3 x Pan Head Phillip Screw M1.4×8

8 x Pan Head Phillip Screw M1.4×10

1x Set Screw M3x2mm

2x Button Socket Head Bolts M2x6mm

2x Hexagon Socket Head Cap Screw M3x14mm

2x Flat Washer M3

Conversion of Gearbox Set and Motor Mount MANUAL

Features Gearbox Set Alu

Made of aluminium, sturdy and durable, wear resistant

CNC machined for high precision and strength

Easy to install and remove, fit to the car perfectly

Features Gear Set

The replace for the original gear set.

High quality steel.

Integral coupling.

Easy to install.

Features Spur Gear, 12T Pinion Gear:

Brass Pinion 12T 3mm hole for easy mount outrunner motor 2204

Aluminum CNC 32T 0.5 Mod Pinion Gear

Features CNC 2204 Motor Mount

Motor mounts for 2204 motors are CNC machined from aluminium billet making them very strong and lightweight. They are designed to fit Axial SCX24.

The motor mounts were designed with a mixture of both aerospace aluminum material and beautiful carbon fiber material. This will allow for proper protection for SCX24 gear set.

The aluminum motor mounts help to increase strength for holding the motors properly and also work great as a heat sink for cooler running motors.

Easy to Install.

All hardwares included.

Package included

1x51T / 19T Gear Set

1x Gearbox Set Alu

1x CNC Motor Mount

1x Spur Gear 32T

1x 12T Pinion Gear

1x Carbon Plate

2 x Bearing 4x8x3

2 x Bearing 2x5x2.5

3 x Pan Head Phillip Screw M1.4×6

3 x Pan Head Phillip Screw M1.4×8

8 x Pan Head Phillip Screw M1.4×10

1x Set Screw M3x2mm

2x Button Socket Head Bolts M2x6mm

2x Hexagon Socket Head Cap Screw M3x14mm

2x Flat Washer M3

Tri Damper System for NX-262 Motor Mount, NX-247 and NX-248 Gimbal Motor Mount.

ONLY for NX-262 98-102mm MM Motor Mount

Packing :

2 x Side Damper

1 x Side Damper mount

2 x M2x3 Button Hex Head Screw

2 x M2x5 Set Screw

2 x 2x4x1 Aluminum spacer

Requires:

NX-262 98-102mm MM Motor Mount, NX-247 PN2.5 gimbal motor mount , NX-248 MR03 gimbal motor mount.

NX-130 to NX134 center shock ( depend on color).

NX-151 damper springs set, NX-021 carbon damper disk.

Compatible for RC Drift Model 1/24 and 1/28.
Made by CNC.
Suitable for both newbie and professional drivers.
Color: Black
Dimension:
20×11 mm
Weight: 2.5 g

Compatible for RC Drift Model 1/24 and 1/28.
Made by CNC.
Suitable for both newbie and professional drivers.
Color: Black
Dimension:
20×9 mm
Weight: 2,1 g

Nexx Racing's Optional/Replacement Carbon fiber, vented High down force spoiler. offers: tough, high downforce and trick looking!

Nexx Racing's JAGUAR, RC MOTORCYCLE KIT. This easy to drive, 1/12th scale, *Robust, Carbon fiber frame motorcycle includes: *clear, paintable lexan driver and body work, *Inverted, oil or grease filled fork sliders, *adjustable drive/clutch, *CNC'd aluminum, anodized wheels, *single sided, adjustable swing arm, *special, top quality, realistic rubber tires, *simulated carbon dual brake disk, *precision belt drive system, * 5500KV brushless motor, EMax ES08MD digital servo and display stand included! Micro JST receiver and ESC required