RRE021

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RX28-014G2

RX28-046-1

Version 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

RX28A-28 

l-New 7075-T6 Adjustable Aluminum Upper Arms from Reflex Racing Allow you to fine tune the camber in the front of your RX28. Compatible with all cars, these arms use a turnbuckle and ball cup to adjust the camber of your car to suit track conditions.  

https://youtu.be/Jk_fJgMrN6Y

RX28A-04

RRE012: Reflex High-Performance Hard Case LiPo Battery for 1/28 Scale RC Models

Revolutionary Hard Case Design for Enhanced Performance

Reflex Racing introduces the industry's first hard case LiPo battery designed specifically for modern 1/28 scale RC chassis. This innovative battery delivers superior performance through advanced engineering and thoughtful design.

Key Benefits of Hard Case Technology

Improved Performance

• Reduced connection points, efficient plugs, and thicker wire lower internal resistance
• Enhanced current flow with minimal heat loss
• Higher voltage capacity (safely charges to 8.6V)
• Recommended charging rate: 1.0A

Better Wiring Solution

• Bullet-to-battery system creates significant space savings
• Ideal for low-profile bodies like Pan Car models
• Streamlined installation process

Enhanced Safety & Durability

• Prevents wire breakage at shrink wrap exit points
• Superior cell protection against impact damage
• Reduces risk of punctures and shorts from chassis contact

Technical Specifications

• Dimensions: 44.5 x 19.7 x 13mm
• Weight: 17g

Package Includes

• 1 Hard case LiPo battery pack
• 2 Gold bullet plugs

Compatible Charging Cable Sold Seperately

RX604-45

All new from Reflex Racing is our brand new Low Profile slick tires for RCP tracks. These tires are made from a very tough and long lasting grippy rubber. They were developed to match the grip envelope of our 30 degree radials.

We recommend to mount the tires 1 of 2 ways:

For a less hassle, no truing method, mount on a Reflex Racing Speed Dish Wheel with a 22.6 plate. Let the tire break in over time. It is very long lasting, but the results are that the tire works after a couple of laps. If it is too aggressive in the middle of the corner, try removing some camber or running a softer front spring.

If you like to true your tires, mount them up on a truer and bring them down to 22.7-22.8mm and use with a 22.6 plate. After truing, the tires may be a little bit aggressive while they break in, so make sure you have some freshly skimmed 30 degree rear radials or you may have too much front bite. Since the material is very hard, we recommend running the tire truer where the tire and drum are spinning away from each other. With the PN Brand of truers, we find the most success running the truer in reverse and around 6v.

So when do you chose the 45 vs the 40? The 40 cuts a little bit harder, but it is smoother in the middle of the corner. Opposite is true for the 45. It really depends on what you are trying to do. If you want more middle and exit, use the 45. If you want smoother middle and exit, use the 40.

***Wheels are for picture only, they are not included***

RX28A-17-XH

RX544

Stronger Titanium Shaft for your Gear Differential.

RX28A-33-SS

RX28-048

RX28A-17-MS

Medium Springs for KISS Front End. This is from the second batch of springs starting 12/23/2022

RX28A-01

This option rear pod plate is about 4g heavier than the stock one. It allows the rear end to be a little more stable and removes a little bit of rotation. We typically like to use this in Pan Car and Lexan classes, but it can be helpful in plastic body classes in low to mid traction conditions.

RX28A-06

RX28A-05

This is our interpretation of a Racing Body. Developed over the last 6 months to provide more stability, downforce and steering so that your 1/28 scale car car run faster, more consistent laps. The smooth design of the front pontoons helps the body slide off of walls, preventing hang ups on RCP Track.

This listing includes an RX520 GT Front Bumper, 4 Body Posts, 8 body clips and hardware. Bodies include double window masks, sticker sheet with lights and details plus wing mounting hardware.

RX28-034

RX515V4 

What makes the Reflex Ball Diff Special? Attention to details. We worked on sourcing the highest quality materials and ended up with a light weight ball diff that has better engagement and acceleration.  

The ball diff comes standard with super hard steel diff rings, 7075 T6 aluminum diff shaft, carbide diff balls, hard o-ring for tighter adjustment, our specially designed 10 ball spur gear and lightweight 7075 aluminum shaft and diff parts. The V4 diff now also comes with a molded spur and spur gear covers. The spur gear is super durable, quieter and much longer lasting. The covers are now about 50% lighter than the aluminum variants, which gets the weight down to a scant 6.6g with covers and 5.8g without (including the left hub).

Instructions -https://www.reflexracing.net/assets/images/Reflex%20Racing%20V2%20Ball%20Diff.pdf?rdm=BFC5F24445B0