RX505-1

RX600R141Y

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

The 14mm +1 provides a little more stability than the +0 rear and limits rotation a little bit. The result is typically a little easier to drive car.

RX514

All New for Reflex is the GL Racing GLR Chassis. More forward weight bias for better stability and less traction rolling. Black slick coating and chamfered edges for less friction on the track when bottoming out and rolling on RCP.

RX506

RX600R14Y

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

Carbon Fiber Tweak and Damping Plate

The Aluminum Servo Saver provides more protection for your servo than the direct horn, but is more durable than the stock plastic unit.  This is a good compromise for those that are looking for more direct steering and servo protection.

RX28-074 Gen 3 Lower Arms

Aluminum Wing Mount

Damper Spring - Medium (Silver)

Parts Tree No. 2

Introducing the Reflex Racing TRUE SPEC 460mAh Battery
All-new from Reflex Racing, the True Spec 460mAh LiPo delivers increased capacity, significantly lower internal resistance, and a flatter discharge curve—all in the same footprint as our popular 400mAh 8.7V LiHV pack. At only 13.0mm tall (vs. 12.3mm on the 400mAh), this pack offers approximately 30% lower IR, resulting in improved performance and reduced fade.

Dimensions: 44.8 × 24.0 × 13.0 mm

Perfect for Stock and Super Stock racing, where holding power throughout the run is critical.

Reflex Racing Battery Lineup

RRE012 – 340mAh LiHV

• Ideal for general hobby use

• Fits most platforms

• Great for drifting and home tracks

• Best when power demands are moderate

RRE015 – 400mAh LiHV

• Excellent for Modified racing

• Ideal for shorter tracks

• Offers slightly lower CG

• Smoother power response

• Preferred when lower CG matters more than the flatter discharge curve of the 460mAh

RRE025 – 460mAh LiPo (True Spec)

• Maximum power and runtime

• Highest capacity and lowest IR hardcase 1/28 battery on the market

• Best choice for Stock, Super Stock, and short-charge Modified racing

• Flattest discharge curve and strongest punch in the lineup

Center Spring - Silver (Medium)

Center Spring - Gold (Hard)

FX28-015 FX28 Steel Front Axles

Parts Tree No. 3

Low Profile Damper System – PN2.5 AAA Chassis

Achieve the Ultimate Low CG Setup for Your AAA Car

Introducing our all-new Low Profile Damper System, specially engineered for the PN2.5 AAA chassis. By repositioning the dampers through innovative design, we've created an extremely low center of gravity suspension setup—delivering unmatched performance and handling on the track.

This high-performance suspension kit is designed for simplicity and compatibility, making it easy to upgrade your PN2.5 with confidence.

Key Features:

• ✅ Ultra-Low CG Design – Improved cornering stability and smoother transitions

• ✅ Direct Fit for PN2.5 AAA Chassis – No modification needed

• ✅ T-Bar Compatible – Seamlessly integrates with traditional T-bar setups

• ✅ Durable & Lightweight – Engineered for serious racers

What’s Included:

• Complete Low Profile Damper Assembly

• All required mounting hardware

• Instructions for easy installation

Note: Center top shock is not included. You can use our Reflex Racing RX28A-32 or any other traditional 1/28 scale center shock of your choice.

Upgrade your suspension. Lower your CG. Win more races.

RX28-059