RX28-055-1

New G2 Ball Adjustable Upper arm replacements.

*Must use with RX28-044 2mm Turnbuckle set and/or RX28-042 2mm Ball Cups.

RX600R141G

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

The 14mm +1 provides a little more stability than the +0 rear and limits rotation a little bit. The result is typically a little easier to drive car.

Sensor cable for AWD cars with ESC installed next to motor.

RX518

Based off of our 2021 and 2022 PN and 2021GL National winning RX505 this rear suspension is designed to increase the performance of your GL Racing GLR. Comes with all new V2 Side springs for more fine tuning.

This suspension lowers the CG of the car and provides better forward bite and faster, flatter cornering.

FX28 Disc Damper Spring - Hard (Gold)

RX600R-15Y

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

The -1.5 1mm wheel was designed so we could use wider tires up front of our RX28s, while keeping the width up front with the equivalent of a +1 with 8.5mm wheels (in terms of the RX28). The negative offset- inset design reduces the scrub radius and makes the steering more precise. When using 11mm tires up front, we have found that the car is easier to drive and more consistent in modified, with smoother response and longer lasting tire life.

RX28A-33-MS

RX600R-15W

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

The -1.5 1mm wheel was designed so we could use wider tires up front of our RX28s, while keeping the width up front with the equivalent of a +1 with 8.5mm wheels (in terms of the RX28). The negative offset- inset design reduces the scrub radius and makes the steering more precise. When using 11mm tires up front, we have found that the car is easier to drive and more consistent in modified, with smoother response and longer lasting tire life.

Carbon Fiber Battery Holder

RX28SE-03

RX600R3Y

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

RX600F0G

Option 2° aluminum knuckles.  Use more camber on tracks with sweeping corner where the tires will cone towards the outside in order to get more even tire wear.

Carbon Fiber Motor Pod Plate

Sensor cable optimized in length for a 2wd 1/28 car with Hobbywing Mini-28 ESC

RX28SE-07