RX538-2

This Gear Set includes the Case O-Ring

RX28A-17-2

Replacement king pins for your KISS front end.

RX603-30

All new from Reflex Racing is our brand new radial tires for RCP tracks. Through out testing in several spots across the USA we have found these tires to perform on par and often beyond the other offerings in the market. The feedback from both Pros and Joes is that these tires offer superior stability under rotation and great forward grip out of the corners.

The design of this tires was conceptualized so that the tire was not directional and instead of building a tread pattern on a slick, we actually cut into the slick to create a tread pattern. The result is a tread that flexes less for more stability under load and better exit traction. The compound was selected so that these tires still perform really well once the tread pattern has worn down well beyond being visible. In high traction conditions, this allows this tire to be used in smaller diameters, providing superior corner speed. Additionally we optimized the tire diameter for maximum corner speed and better rotation on the individual application. The 14mm tire is only 24.5mm in diameter, while the 11mm tire comes in at 25.25mm when mounted with super glue.

We recommend the 30 degree rear tires under most conditions. They work well in temps as low as 45 degrees (F) and perform well all the way into the 80's (F). If the grip is higher, simply cut the tire down smaller if you want a little more rotation in tight corners.

***Wheels are for picture only, they are not included***

RX28A-15

Optional Rear Upper Shock Mount. Allows for easy adjustment of the shock position. More forward provides more body roll and smoother steering. More Rearward is more aggressive and more forward traction.

RX28A-41 

This short steering horn is designed for high traction applications where your car is too edgy and you are looking for a slower steering feel. It is ideal for Pan Car and larger flowing tracks where you do not need as much steering throw. Due to the design of the shorter horn, you will only be able to achieve about 80% of the previous steering throw, so if you are using 85%+ Dual Rate, this is probably not the horn you want to use.  

RX538-3

Replacement Shaft for your Gear Differential.

RX28-068

RRE020 

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RX531

These sleek-looking steel bumper weight set allow you to fine tune your weight bias on your Mini-Z when used in combination with any of our Carbon Fiber Bumpers. When running on bumpy or high grip environments, playing around with a little bit of nose weight can impact tremendously the behavior of your car. This weight set allows you to fine tune your nose weight in 1g increments. This is easily achieved by stacking the thru-hole weights and then clamping them down on the bumper with the threaded weight on top.

Included in the set is:

2x 1g thru weights

1x 1g threaded weight

1x M2x4CS Screw

1x M2x6CS Screw

RX532-BK

The Wing Things are designed to make mounting your wing much easier. Install the screw from the bottom of the body and thread them into the wing thing threads. You can hold the wing thing with a 4.5mm hex wrench to fully tighten.

The total weight of the 2 wing things and 2 M2x4 is roughly 0.5g; about the same weight as using a couple of steel hex nuts and 6mm steel screws that are typically included in body sets.

RRE017

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs. Durable, stylish and perfect length cables to help you tidy up your pit space!

RX28A-17-HS

Hard Springs for KISS Front End. This is from the second batch of springs starting 12/23/2022

RX28-054

RX545

Replacement Spur Gear for your RX538 Gear Differential. The molded spur is a little bit tougher and longer lasting than the delrin machined version.

Link to Manual - https://www.reflexracing.net/assets/images/GearDiff_Manual.pdf?rdm=E9A4E1CA4AD2

**Please not the diff is not sealed at the bearings, so it is not designed to be "filled" with oil , but a healthy amount can be used when building. Left hub is not included.

RX28-019

Replacement 3.5MM Ball Cups

RX534 

The Reflex Racing mass damper set is designed to smooth out your 1/28 scale car by reducing the amplitude of vibration on the front end caused by the uneven nature of RCP Tracks. The mass damper is mounted on the ballast weight hole on any Reflex Racing carbon bumper or on the body clip posts of your RX511 Jomurema bumper. The result is a car that is smoother to drive and more controllable at high speed and through bumpy sections. Adjust the damper by using a different combination of weights.

Contents

• 3x 0.9g Tungsten Weights
• 1x 4mm aluminum post
• 2x M2x3 CS Screws

These springs are now gray to make them easier to identify.

RX28A-38

Replacement front end for your RX28.

It includes:

-Bulkhead

-Upper and Lower Hinge Pins

-Gray (Hard Arms)

-RX28 Shock Set with Green Front Springs

-Front Shock Tower

-Necessary Hardware For Installation of all parts on the front end.

Required:

-Knuckles

-Front Axles