RX28A-17

Old School Style Sliding Coil Over King Pin Front Suspension set.

This suspension set is fully adjustable, dampened and super easy to use!

Included in kit:

-1x Lower Tower Bar

-1x Left and Right Upper Arm Strut

-4x Delrin Pivot Balls

-2x Grooved Upper Split King Pin 

-2x Lower Split King Pin 

-2x Delrin Spring Perches

-2x Medium Front Springs

-2x0.25mm Copper Washers

-2x 0 Degree Camber Inserts

-2x 0.5 Degree Camber Inserts

Car is able to set:

-2 or 4 degrees Caster

-1.0, 1.5, 2.0 degrees Camber

Please NOTE:

POLISH YOUR KINGPINS. This will ensure the smoothest operation. The finish is good on the pins, but mirror polishing sliding kingpins is day 1 stuff. The extra bit of work is worth it.

THIS FRONT END DOES NOT INCLUDE KNUCKLES AND AXLES.  

The best way to polish them is to set up the king pins on a drill or rotary tool and polish with a good polishing compound like mothers. Spin it and shine the parts until mirror-like finish. Once polished, clean them and lube them. We suggest Kyosho 30,000 Blue Gear Grease.

INSTALLATION INSTRUCTIONS

https://www.reflexracing.net/assets/images/KISS_Instructions.pdf?rdm=2A156E237CAF

RX541

This bumper was developed to be in compliance with the 2024 PNWC Bumper Rules. The new requires there to be a 2mm gap between bumper and body if the bumper is made out of CF. This bumper retains the same shape as the RX528 Mako Bumper, but also has a nested, front TPU liner which satisfies the rule as the leading edge is now made from flexible, rubber like material (albeit, still super rigid).

This bumper is slightly heavier, but not by much. We recommend using CA to attach the bumper more securely to the CF part.

RX28-045G2-1

G2 molded A-Arms for your RX28. Includes left and right dedicated arms.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

RX539

When you think innovation, you don't often think body posts, however these are one of the favorite products we have released.

Our all new body post system is full of little details that will make your car look cleaner, make it more durable and also allow you to adjust you body height easier and more precisely than before.

RRE014

These custom made 2mm split plugs by Reflex Racing are designed to be tougher and have less IR than other plugs available in the market. These plugs are manufactured to our strict specification, in order to solder better and have tougher soldering connections going to your battery, since the wires we use in 1/28 can be a bit fragile. In our signature, attention to detail style, we made a ridge on the top of the plug to make it easier to pull on a surface without having to yank on the wire.

RX540

Hardcoated, high quality 64 Pitch 7075 T6 Aluminum pinion gears for your 1/28 scale car. Each gear set comes with 6 pinions 10T-15T

RX28A-17-1

Replacement Front End Pivot Balls for your RX28 KISS Front End.

RX538 

It's finally here! Our all new Gear differential was designed to be a high quality and high performance addition to your 1/28 scale car. More rotation and harder acceleration than the ball differential yields a car that is often about a tenth faster to drive in high traction surfaces. The feel of this gear diff is very balanced and this makes the acceleration super smooth and strong. At only about 4.7g, it is also super light for less rotational mass.

The gear diff is sealed from the elements as the gears are inside a machined aluminum case in which you can larger amounts of grease to change the behavior of the differential action. The ticker the grease, the lower response into the corner, but this could be at the expense of a little bit of exit traction. We don't recommend going too heavy on the oil (maybe use no more than 1 or 2k CST oil), but you can use oil with no leakage at the spur and only slight leaking at the outputs. 

INSTRUCTION MANUAL - https://www.reflexracing.net/assets/images/GearDiff_Manual.pdf?rdm=E9A4E1CA4AD2

RX28A-08

RX28-046G2-1

Gen 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling. These are the Gen2 dedicated left and right arms.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

RX521V2

This set-up board is made from 3mm CF. It Measures 165x200mm and is the perfect size to comfortably work on and travel with in your pit gear. Included on the board is a round bubble level and 4 adjustable machined aluminum feet to set the board flat in order to make adjustments for your car more precise. The New Version 2 board also included machined parts pockets to help you keep loose items like body clips and wheel nuts in your pit.

RXGL-KIT 

This is a comprehensive conversion kit designed to make your Giulia Leaner, faster and more durable. This conversion kit makes your Giulia, RTR around 165-175g, depending on other miscellaneous parts, body and electronics selection. It is designed to be used with the smaller, 8.5mm tall servos like the Reflex Racing RRE007.

The kit includes:

Hardcoated Stainless Steel Main Chassis

7075 T6 Aluminum Motor Mount, Servo mount, Center Shaft and Battery Hold Down System

CF Shock Towers, Top Deck, battery hold down tabs and HW motor, motor mount Spacer

Adjustable F/R Shocks and Front Springs (you will use the std front springs in the rear to start)

Delrin Servo Horn

Necessary Hardware for Installation

*car images show prototype, some items, such as springs can vary.

Link to Instructions - https://www.reflexracing.net/assets/images/Giulia_Conversion_kit.pdf?rdm=978EEBBE85B0

RX28A-29

Go longer between re-builds with these dust covers for your ball diff. Compatible only with the Reflex Racing V3 Spurs and beyond, these dust covers should work on the majority of diffs out there when using a Version 3 and beyond ball diff spur.

The set of dust covers adds about 1.6g of weight to the diff.

RX28-047

RX28A-24

Use the linear springs for smoother response. This Green Spring is a similar to the RX28A-06 Soft Center Spring but is more linear.

RX28-045-1

Version 2 molded A-Arms for your RX28.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

RX28-UKIT

Updated kit to bring your RX28 Gen 1 car to Gen 2 spec.

This kit includes all the critical update parts included in the new Generation cars. It includes:

-RX28A-20 Reflex Racing RX28 30g Steel Chassis Plate and SE Style steering CF plate

-RX28-045G2 RX28 G2 Medium A Arm Set

-RX28-052 RX28 Gen 2 Motor Mount

-RX28-050 RX28 Gen 2 Molded Center Pivot

-RX28-049 RX28 Gen 2 Molded Side Links

RX28A-25

Linear springs are smoother in response than the standard springs. They are wound from smaller diameter wire and have less coils. This allows for the spring to have a more linear response through the suspension stroke. The front end tends to have a more constant response instead of getting more aggressive as the car rolls deeper; which is the case with the standard type springs. The Pink Springs are similar in rate to the Medium, Blue Silver Springs, (part no RX28A-11).